Course Schedule
Duration: 48 hours
Mode of delivery: Classroom
Venue: Ngee Ann Polytechnic
Schedule may be subject to changes. The detailed timetable will only be released upon enrolment and closer to the course commencement date.
For self-sponsored applicant, you may proceed to apply after signing in with Singpass / Student ID.
For company-sponsored applicant, please approach your company HR to put in the application via the company portal using Corppass at STEP.
By registering interest for the course, you will be notified to register for the course when the next course intake is open for application again.
About Course
Course Objectives
Participants will also learn about fuel injection, emission control and engine management, including in systematic fault-finding using mechanical and electrical approaches.Course Description
Topics covered are:- Engines construction and operation
- Lubricating system
- Cooling system
- Intake, exhaust systems, turbocharger and compressors
- Basic electrics and electronics
- Usage of diagnostic tools
- Fundamentals of sensor, actuator, control unit and network
- Fuel injection system
- Ignition system
- Emission control system
- Engine management system
- Engine overhauling
- Engine management system diagnosis
Steven Xu is a dedicated educator with a Bachelor’s Degree (Hons) from South China University of Technology and an Master’s Degree in Mechanical Engineering from Nanyang Technological University. He has certification as an Adult Educator (ACTA) from the Institute of Adult Learning, Singapore.
Before joining Ngee Ann Polytechnic, Steven Xu worked in Cycle & Carriage, Daimler South East Asia, Indeco Engineers, during these periods, he gained the workshop management knowledge and the advanced automotive technologies, which included automotive systems, design, fabrication and diagnosis.
As a Senior Lecturer of the School of Engineering, Steven Xu contributed in various topics for the full time students such as automotive technology, electrical technology, engineering system design, mechanical design. Besides his fulltime courses, he also worked closely with the industry and government agencies. He worked with Singapore Standards Council, Singapore Motor Workshop Association (SMWA), and other industry partners to develop a Singapore Standard on Motor Workshop SS662:2020. He was in the Technical Expert Panel for Certification for Technical Specialist (Bus) organized by LTA and IES, he is one of the assessors for the bus technician certification.
He is the member of IES Automotive Technology & Standards Working Group, the member of the IES EV Maintenance Sector Taskforce and member of AQAC Land Transport Automotive Bus.
Steven Xu has developed and conducted the following short courses:
1) Automotive Engine Technology
2) Automotive Electrics and Sensor Technology
3) Automotive Powertrain and Chassis Technology
4) Automotive Hybrid Technology
5) Vehicle electrical, hydraulic and pneumatic circuits and diagrammes
6) National EV Specialist Safety (NESS) for cars
7) National EV Specialist Safety (NESS) for buses
Terms & conditions
Terms & conditions details
Disclaimer
Ngee Ann Polytechnic owns and maintains this website as a service to its students, staff and members of public. We invite you to visit frequently to browse through our pages and download and copy materials for your personal use, subject to the restrictions outlined below.
Links to Third Party Information
This website has links to many third party information providers who are not affiliated with the Polytechnic. The Polytechnic does not endorse any of these sites, nor the information or merchandise contained or offered by these sites. Ngee Ann Polytechnic cannot make any warranties as to the accuracy, reliability or security of any information you might be requested to give any third party and, in no event shall the Polytechnic be liable for any damages whatsoever.
Information and documents provided on this website are provided “as is” without warranty of any kind, either express or implied, including without limitation warranties of merchantability, fitness for a particular purpose and non-infringement. Ngee Ann Polytechnic provides, with reasonable effort, accurate and up-to-date information on this website. It does not, however, make any warranties or representations as to its accuracy or completeness. It periodically adds, changes, improves or updates the information and documents on this website without notice.
Limitation of Liability
Ngee Ann Polytechnic assumes no liability or responsibility for any errors or omissions in the content of its website. You are using the website at your own risk. Under no circumstances shall Ngee Ann Polytechnic or any other party involved in creating, producing or delivering the contents of this website be liable to you or any other person for any direct, indirect, special, incidental or consequential damages arising from your access to, or use of, this website.
The use, reproduction, copying, or redistribution of the Ngee Ann Polytechnic logo is strictly prohibited. Written permission must be obtained from the Corporate Communications Office for any such request.
All software and/or documentation made available on this website for downloading is the copyrighted work of the relevant suppliers. Ownership of the software and documentation belongs to the copyright holder. Thus ownership is not transferred to you if you download. The use of any such software and/or documentation is subject to the terms of a license agreement as provided by the supplier of the software. Please read the licence agreement if you intend to install the software.
These Terms of Use shall be governed and construed in accordance with laws of the Republic of Singapore.
The use of datasets that Ngee Ann Polytechnic publishes to the public free-of-charge (Open Data) will be governed by the Singapore Open Data Licence.
The Singapore Government may, from time to time, issue new versions of the Singapore Open Data Licence. Your continued Use of the datasets constitutes your acceptance of the new version of this Licence.
Course Structure
TPG course reference No.
TGS-2023025565
Financial matters
Course fees payable (incl. GST & excl. supplementary fee)
| Description | Automotive Engine Technology - Principles, Service and Diagnosis | Total course fee |
|---|---|---|
| Full Course fee | $1,035.50 | $1,035.50 |
| Enhanced Training Support for SMEs for Singapore Citizen | $120.65 | $120.65 |
| Enhanced Training Support for SMEs - SPR & LTVP+ | $120.65 | $120.65 |
| SkillsFuture Mid-Career Enhanced Subsidy for Singapore Citizen aged 40 and above | $120.65 | $120.65 |
| SkillsFuture Baseline Funding for Singapore Citizen Aged Below 40 | $310.65 | $310.65 |
| SkillsFuture Baseline Funding for SPR/LTVP+ | $310.65 | $310.65 |
GST rate
Payment option
Allowed payment by
SkillsFuture Credits (SFC);
Credit card (e-payment);
Debit card (e-payment);
PayNow (e-payment).
Refund and withdrawal policy
- Please note that a 100% refund will be available if the withdrawal request is submitted more than or equal to 14 days before the course start date.
- Please note that a 50% refund will be available if the withdrawal request is submitted less than 14 days before the course start date.
- Please note that no refund will be available if the withdrawal request is submitted on or after the course start date.
Remarks
(i) Course fees payable;
(ii) Assessment fees which are part of the course;
(iii) Certification fees which are part of the course; and
(iv) GST imposed on components supported for SFC use.
Penalty charges apply if you:
(i) are absent/no-show;
(ii) withdraw from a course within 14 days of the course start date;
(iii) fail to meet terms and conditions for funding eligibility.
SFC cannot be used to offset penalty charges imposed by Ngee Ann Polytechnic.