Government officials will never ask you to transfer money or disclose bank log-in details over a phone call. Call the 24/7 ScamShield Helpline at 1799 if you are unsure if something is a scam.
Close

[NP-SDSEM] Specialist Diploma in Solar Photovoltaic (PV) Engineering and Monitoring (SDSEM)

Offered by School of Engineering

Specialist Diploma

Course Schedule
About Course
Course Structure
Entry Requirements
Financial Matters
Register Interest
Area of interest
Clean Energy, Engineering

Course Schedule

Class Day(s): Mon and Thurs
Time: 6:00pm - 10:00pm
Delivery mode: Face-to-face & Home-based learning (Sync)

About Course

Course Objectives

•   To provide systematic and in-depth training for local solar engineers and power engineers in PV technology, electrical power engineering, PV system monitoring and analysis.
•   To prepare graduates to work as technical officers/engineers in solar industry. For applicants who are already in the solar or power industry, the course aims to deepen their technical knowledge and skills in PV engineering & monitoring. This course is also aligned with the Skills Framework of Energy & Power sector, Distributed Generation track.

Course Description

The SDSEM consists of two post-diploma certificates (PDCs), with a total of 5 modules.
•   PV Cell and Module
•   Power System Technology
•   PV System Design & Integration
•   Distribution Power System Operation, Protection and Maintenance
•   PV System Monitoring and Analysis

Course Structure

TPG course reference No.

TGS-2021005374

Specialist Diploma in Solar Photovoltaic (PV) Engineering and Monitoring

Post-Diploma Certificate in PV System Operation, Maintenance and Monitoring
Distribution Power System Operation, Protection and Maintenance (NP-013514)
This module covers the operation, protection and maintenance of PV power systems, the equipment used and the protection and safety schemes/devices required for the protection of both equipment and personnel on AC and DC sides. Topics include PV power systems, high voltage and low voltage distribution systems, practical distribution equipment such as switchgears, fuses, distribution transformers, cables and protection systems. Load flow and fault calculations of typical power systems with PV generators and the common types of overcurrent, overvoltage and fault protection are also taught in the module. PV maintenance procedures and requirements will also be covered in this module.
PV System Monitoring and Analysis (NP-013515)
This module covers the monitoring and analysis of PV system performance to ensure optimum output and early detection of faulty equipment. Topics include the monitoring system design and setup, energy and weather data collection and analysis, commonly used theoretical models for analyzing PV system field performance and degradation, main factors that affect PV system performance such as light induced degradation (LID), potential induced degradation (PID), and various kinds of mismatch problems, computer tools for performance monitoring (e.g. Excel-VBA), advanced testing instruments such as PV analyzer, infrared thermal camera and portable EL tester. Relevant IEC standards and Singapore standards will also be introduced in this module.
Post-Diploma Certificate in PV System Technology, Design and Integration
PV Cell and Module (NP-013511)
In this module, topic covers are basic of light, solar radiation, semiconductor and PV cell / module operation. Various factors that can affect the PV cell’s output will be illustrated. Operation principles of PV cell/module will be discussed. Participants will learn how mismatch among the cells affect the PV module’s output and the role of bypass diodes. A brief look at the solar module encapsulation process and the material used in the encapsulation will also be included.
PV System Design & Integration (NP-013513)
This module introduces the various components and their functionalities in the formation of a PV system. It also provides the guidelines to the selection and sizing of these constituents to allow their proper compatibility to operate as an integrated system. Stand-alone and grid-tied systems will be covered. Practical hands-on sessions will also be included to ensure trainees could do experiments and make measurements on PV modules, inverters, power flow, equipment protection, system performance and battery management. Design, installation, testing and commissioning of PV system according to SS638, SS601 and Power-Grid Transmission Code and relevant IEC codes will also be discussed in this module.
Power System Technology (NP-013512)
This module covers key components used in DC and AC networks of PV system installation and low and medium voltage AC network. These components include power cables, switching devices, protective devices, inverters, transformer, earthing, lightning protection. The module also covers mathematical analysis of 3-phase AC system, harmonics, power factors, and interpretation of single-line drawings with protective devices.

Entry Requirements

Condition 1

Highest qualification

Local Polytechnic Diploma in Engineering.
or

Condition 2

Highest qualification

University Degree in relevant areas where the medium of instruction is English.
Recognition of Prior Learning (RPL)
Applicants who do not meet the entry requirements may be considered for admission to the course based on supporting evidence of competency readiness.

Suitable applicants who are shortlisted may have to go through an interview and/or entrance test.

The Polytechnic reserves the right to shortlist and admit applicants.

Financial matters

Course fees payable (incl. GST & excl. supplementary fee)

Description Post-Diploma Certificate in PV System Technology, Design and Integration Post-Diploma Certificate in PV System Operation, Maintenance and Monitoring Total course fee
Full Course fee $4,617.24 $4,617.24 $9,234.48
PR Sponsored by SME $480.79 $339.96 $820.75
Singapore Citizen Sponsored by SME $480.79 $339.96 $820.75
Singapore Citizen Aged 40 & Above $480.79 $339.96 $820.75
Singapore Citizen Aged Below 40 $692.59 $483.96 $1,176.55
Singapore PR $1,846.90 $1,334.16 $3,181.06
Long-Term Visit Pass Plus $4,617.24 $4,617.24 $9,234.48

GST rate

The course fees payable above are inclusive of 9% GST rate.

Payment option

The first payment needs to be made after accepting the offer.

Allowed payment by

The course fee allows to be paid by:
Post-Secondary Education Account (Adhoc withdrawal form);
Post-Secondary Education Account (Standing order form);
SkillsFuture Credits (SFC);
Credit card (e-payment);
Debit card (e-payment);
PayNow (e-payment).

Important note: All course fees are determined based on prevailing funding policies and subject to review and revision annually.

Nett Supplementary Fees Payable

  • GPA Insurance Fee S$2.11,subject to GST,fees payable S$2.30 Allow payment by Post-Secondary Education Account (Adhoc withdrawal form); Allow payment by Post-Secondary Education Account (Standing order form)
  • Other Fees S$7.43,subject to GST,fees payable S$8.10 Allow payment by Post-Secondary Education Account (Adhoc withdrawal form); Allow payment by Post-Secondary Education Account (Standing order form)

Refund and withdrawal policy

  • Please note that a 100% refund will be available if the withdrawal request is submitted more than or equal to 14 days before the course start date.
  • Please note that a 50% refund will be available if the withdrawal request is submitted less than 14 days before the course start date.
  • Please note that no refund will be available if the withdrawal request is submitted on or after the course start date.

Remarks

Company Sponsorship

If your employer is sponsoring your course fee, please refer to this guide to link your company's Corppass to the STEP Corppass e-Service first. Your company will need to generate sponsorship link for you to register for the course.

For more details, please refer to the step-by-step guide to enrol, track and manage employee's learning activities and other services.