[NP-AHT-F] Automotive Hybrid Technology - Principles, Service and Diagnosis (English/Mandarin)

Offered by School of Engineering

Certifiable Courses

Course Schedule
About Course
Course Structure
Financial Matters

Course Schedule

 

Duration: 32 hours [4 days (4 Sundays) - Either English/Mandarin (Refer to the course intake for information)]
Course Timing: 8.30 am to 5.30pm
delivery mode: Face-to-Face Classroom
Venue: Ngee Ann Polytechnic

Schedule may be subject to changes. The detailed timetable will only be released upon enrolment and closer to the course commencement date.

For self-sponsored applicant, you may proceed to apply after signing in with Singpass / Student ID.
For company-sponsored applicant, please approach your company HR to put in the application via the company portal using Corppass at STEP.

Language - English

About Course

Course Objectives

This course equips participants with the knowledge and hands-on practice needed to systematically diagnose and solve problems in complex automotive hybrid vehicle systems. The course will focus on automotive hybrid system. This interactive course will provide opportunities to discuss the safe work practices in electricity, equip the fundamentals of electrical technologies, functions and operations of the automotive hybrid systems, electrical components and their inspections. Examples of systematic fault-finding will also be covered during the skills sessions.
Automotive high voltage air-con system for hybrid vehicles, charging system for plug-in hybrid vehicle will also be covered during the course.

Course Description

-Have the basic electrical knowledge on DC and AC electricity.
-Understand the safety precautions for working on for hybrid vehicle high voltage systems.
-Understand the functions and operations of high voltage battery for hybrid vehicle.
-Understand the functions and operations of hybrid vehicle motor and generator.
-Understand the functions and operations of hybrid vehicle electric converters.
-Understand the functions and operations of regenerative braking system for hybrid vehicle
-Understand the functions and operations of high voltage air-con system for hybrid vehicle
-Understand the hybrid vehicle power configurations and power management
-Carry out the service and diagnosis on hybrid systems such as battery, starter and generator, converters and air-con system
Trainer's profile

Steven Xu is a dedicated educator with a Bachelor’s Degree (Hons) from South China University of Technology and an Master’s Degree in Mechanical Engineering from Nanyang Technological University. He has certification as an Adult Educator (ACTA) from the Institute of Adult Learning, Singapore.

Before joining Ngee Ann Polytechnic, Steven Xu worked in Cycle & Carriage, Daimler South East Asia, Indeco Engineers, during these periods, he gained the workshop management knowledge and the advanced automotive technologies, which included automotive systems, design, fabrication and diagnosis.

As a Senior Lecturer of the School of Engineering, Steven Xu contributed in various topics for the full time students such as automotive technology, electrical technology, engineering system design, mechanical design. Besides his fulltime courses, he also worked closely with the industry and government agencies. He worked with Singapore Standards Council, Singapore Motor Workshop Association (SMWA), and other industry partners to develop a Singapore Standard on Motor Workshop SS662:2020. He was in the Technical Expert Panel for Certification for Technical Specialist (Bus) organized by LTA and IES, he is one of the assessors for the bus technician certification.

He is the member of IES Automotive Technology & Standards Working Group, the member of the IES EV Maintenance Sector Taskforce and member of AQAC Land Transport Automotive Bus.

Steven Xu has developed and conducted the following short courses:

1) Automotive Engine Technology

2) Automotive Electrics and Sensor Technology

3) Automotive Powertrain and Chassis Technology

4) Automotive Hybrid Technology

5) Vehicle electrical, hydraulic and pneumatic circuits and diagrammes

6) National EV Specialist Safety (NESS) for cars

7) National EV Specialist Safety (NESS) for buses

Terms & conditions

Terms & conditions details

Disclaimer

Ngee Ann Polytechnic owns and maintains this website as a service to its students, staff and members of public. We invite you to visit frequently to browse through our pages and download and copy materials for your personal use, subject to the restrictions outlined below.

Links to Third Party Information

This website has links to many third party information providers who are not affiliated with the Polytechnic. The Polytechnic does not endorse any of these sites, nor the information or merchandise contained or offered by these sites. Ngee Ann Polytechnic cannot make any warranties as to the accuracy, reliability or security of any information you might be requested to give any third party and, in no event shall the Polytechnic be liable for any damages whatsoever.


Information and documents provided on this website are provided “as is” without warranty of any kind, either express or implied, including without limitation warranties of merchantability, fitness for a particular purpose and non-infringement. Ngee Ann Polytechnic provides, with reasonable effort, accurate and up-to-date information on this website. It does not, however, make any warranties or representations as to its accuracy or completeness. It periodically adds, changes, improves or updates the information and documents on this website without notice.

Limitation of Liability
Ngee Ann Polytechnic assumes no liability or responsibility for any errors or omissions in the content of its website. You are using the website at your own risk. Under no circumstances shall Ngee Ann Polytechnic or any other party involved in creating, producing or delivering the contents of this website be liable to you or any other person for any direct, indirect, special, incidental or consequential damages arising from your access to, or use of, this website.


The use, reproduction, copying, or redistribution of the Ngee Ann Polytechnic logo is strictly prohibited. Written permission must be obtained from the Corporate Communications Office for any such request.


All software and/or documentation made available on this website for downloading is the copyrighted work of the relevant suppliers. Ownership of the software and documentation belongs to the copyright holder. Thus ownership is not transferred to you if you download. The use of any such software and/or documentation is subject to the terms of a license agreement as provided by the supplier of the software. Please read the licence agreement if you intend to install the software.


These Terms of Use shall be governed and construed in accordance with laws of the Republic of Singapore.


The use of datasets that Ngee Ann Polytechnic publishes to the public free-of-charge (Open Data) will be governed by the Singapore Open Data Licence.

The Singapore Government may, from time to time, issue new versions of the Singapore Open Data Licence. Your continued Use of the datasets constitutes your acceptance of the new version of this Licence.

Course Structure

TPG course reference No.

TGS-2022017444

Automotive Hybrid Technology - Principles, Service and Diagnosis (English/Mandarin)
Automotive Hybrid Technology - Principles, Service and Diagnosis (English/Mandarin) (NP-AHT-F)
Get ready for the current and future automotive technology. Learn about the use of diagnostic tools for hybrid vehicles and more.
A Certificate of Completion will be awarded to learner who achieve at least 75% attendance and pass all required assessment(s).

A Certificate of Attendance will be awarded to learner who meet the 75% attendance requirement.

Financial matters

Course fees payable (incl. GST & excl. supplementary fee)

Description Automotive Hybrid Technology - Principles, Service and Diagnosis (English/Mandarin) Total course fee
Full Course fee $1,090.00 $1,090.00
SkillsFuture Baseline Funding for Singapore Citizen Aged Below 40 $327.00 $327.00
SkillsFuture Baseline Funding for SPR/LTVP+ $327.00 $327.00
SkillsFuture Mid-Career Enhanced Subsidy for Singapore Citizen aged 40 and above $127.00 $127.00
Enhanced Training Support for SMEs for Singapore Citizen $127.00 $127.00
Enhanced Training Support for SMEs - SPR & LTVP+ $127.00 $127.00

GST rate

The course fees payable above are inclusive of 9% GST rate.

Payment option

The payment needs to be made upon the application is submitted.

Allowed payment by

The course fee allows to be paid by:
Post-Secondary Education Account (Adhoc withdrawal form);
SkillsFuture Credits (SFC);
Credit card (e-payment);
Debit card (e-payment);
PayNow (e-payment).

Refund and withdrawal policy

  • Please note that a 100% refund will be available if the withdrawal request is submitted more than or equal to 14 days before the course start date.
  • Please note that a 50% refund will be available if the withdrawal request is submitted less than 14 days before the course start date.
  • Please note that no refund will be available if the withdrawal request is submitted on or after the course start date.

Remarks

SkillsFuture Credit (SFC) can only be used to cover:
(i) Course fees payable;
(ii) Assessment fees which are part of the course;
(iii) Certification fees which are part of the course; and
(iv) GST imposed on components supported for SFC use.

Penalty charges apply if you:
(i) are absent/no-show;
(ii) withdraw from a course within 14 days of the course start date;
(iii) fail to meet terms and conditions for funding eligibility.

SFC cannot be used to offset penalty charges imposed by Ngee Ann Polytechnic.