Course Schedule
Duration: 14 hours (2 days)
Time: 9am to 6pm
Delivery Mode: Classroom
Venue: Ngee Ann Polytechnic
Schedule may be subject to changes. The detailed timetable will only be released upon enrolment and closer to the course commencement date.
For self-sponsored applicant, you may proceed to apply after signing in with Singpass / Student ID.
For company-sponsored applicant, please approach your company HR to put in the application via the company portal using Corppass at STEP.
About Course
Course Objectives
Participants will learn how to program the PLC using IEC61131-3 standard and interface with the IO Link Master using the Ethercat protocol to retrieve the sensor status and control the actuators. They will also learn how to program the HMI to do graphical display of the sensor status and even learn to control the actuators with a click of a button.Course Description
Topics covered are:A. Introduction to IO Link Technology (2 hrs)
- Difference between traditional sensors/actuators vs IO Link Sensors/actuators
- Configuration of IO Link devices on PLC
B. Communication between the PLC and IO Link Master (4 hrs)
- Setup the communication interface between the PLC and IO Link Master
- Learn to retrieve the data from the different types of IO Link sensors and control the actuators
C. Introduction to HMI programming to interface with the PLC and IO Link Master (4 hrs)
- Basics of HMI Programming i.e creating I/O controls and etc and learn to interface with the PLC
and IO Link Master
- Learn how to create the necessary control of the IO Link actuators and display of IO Link sensor
values (Process Data) using the HMI
D. Case studies with assessment (4 hrs)
Terms & conditions
Terms & conditions details
Disclaimer
Ngee Ann Polytechnic owns and maintains this website as a service to its students, staff and members of public. We invite you to visit frequently to browse through our pages and download and copy materials for your personal use, subject to the restrictions outlined below.
Links to Third Party Information
This website has links to many third party information providers who are not affiliated with the Polytechnic. The Polytechnic does not endorse any of these sites, nor the information or merchandise contained or offered by these sites. Ngee Ann Polytechnic cannot make any warranties as to the accuracy, reliability or security of any information you might be requested to give any third party and, in no event shall the Polytechnic be liable for any damages whatsoever.
Information and documents provided on this website are provided “as is” without warranty of any kind, either express or implied, including without limitation warranties of merchantability, fitness for a particular purpose and non-infringement. Ngee Ann Polytechnic provides, with reasonable effort, accurate and up-to-date information on this website. It does not, however, make any warranties or representations as to its accuracy or completeness. It periodically adds, changes, improves or updates the information and documents on this website without notice.
Limitation of Liability
Ngee Ann Polytechnic assumes no liability or responsibility for any errors or omissions in the content of its website. You are using the website at your own risk. Under no circumstances shall Ngee Ann Polytechnic or any other party involved in creating, producing or delivering the contents of this website be liable to you or any other person for any direct, indirect, special, incidental or consequential damages arising from your access to, or use of, this website.
The use, reproduction, copying, or redistribution of the Ngee Ann Polytechnic logo is strictly prohibited. Written permission must be obtained from the Corporate Communications Office for any such request.
All software and/or documentation made available on this website for downloading is the copyrighted work of the relevant suppliers. Ownership of the software and documentation belongs to the copyright holder. Thus ownership is not transferred to you if you download. The use of any such software and/or documentation is subject to the terms of a license agreement as provided by the supplier of the software. Please read the licence agreement if you intend to install the software.
These Terms of Use shall be governed and construed in accordance with laws of the Republic of Singapore.
The use of datasets that Ngee Ann Polytechnic publishes to the public free-of-charge (Open Data) will be governed by the Singapore Open Data Licence.
The Singapore Government may, from time to time, issue new versions of the Singapore Open Data Licence. Your continued Use of the datasets constitutes your acceptance of the new version of this Licence.
Course Structure
TPG course reference No.
TGS-2023025555
They will also learn how to program the HMI to do graphical display of the sensor status and even learn to control the actuators with a click of a button.
A Certificate of Attendance will be awarded to learner who meet the 75% attendance requirement.
Entry Requirements
Applicants should preferably have a basic logic circuit knowledge in electrical engineering.
Financial matters
Course fees payable (incl. GST & excl. supplementary fee)
Description | Programming IO Link Smart Devices (IEC61131-9) | Total course fee |
---|---|---|
Full Course fee | $654.00 | $654.00 |
Enhanced Training Support for SMEs for Singapore Citizen | $76.20 | $76.20 |
Enhanced Training Support for SMEs - SPR & LTVP+ | $76.20 | $76.20 |
SkillsFuture Mid-Career Enhanced Subsidy for Singapore Citizen aged 40 and above | $76.20 | $76.20 |
SkillsFuture Baseline Funding for Singapore Citizen Aged Below 40 | $196.20 | $196.20 |
SkillsFuture Baseline Funding for SPR/LTVP+ | $196.20 | $196.20 |
GST rate
Payment option
Allowed payment by
SkillsFuture Credits (SFC);
Credit card (e-payment);
Debit card (e-payment);
PayNow (e-payment).
Refund and withdrawal policy
- Please note that a 100% refund will be available if the withdrawal request is submitted more than or equal to 14 days before the course start date.
- Please note that a 50% refund will be available if the withdrawal request is submitted less than 14 days before the course start date.
- Please note that no refund will be available if the withdrawal request is submitted on or after the course start date.
Remarks
(i) Course fees payable;
(ii) Assessment fees which are part of the course;
(iii) Certification fees which are part of the course; and
(iv) GST imposed on components supported for SFC use.
Penalty charges apply if you:
(i) are absent/no-show;
(ii) withdraw from a course within 14 days of the course start date;
(iii) fail to meet terms and conditions for funding eligibility.
SFC cannot be used to offset penalty charges imposed by Ngee Ann Polytechnic.